2024 450 XC-F
2024 KTM 450 XC-F for Sale at KTM Epping in Epping, VIC | Review Specifications, Features & Information
THE KING OF XC
The 2024 KTM 450 XC-F rolls into the pits already armed with the learnings of past championships, blistering with an arsenal of fresh weaponry like all-new Close Cartridge spring forks and dedicated cross-country settings. Being the leading 4-Stroke in the Cross Country division for years, the KTM 450 XC-F once again brings its undeniable READY TO RACE spirit to the starting line with a relentless assault on the podium. With its proven track record, sledgehammer-like power, and insane handling, it can only mean one thing - it's time to extend the trophy room.
EASY SUSPENSION ADJUSTMENT
The 2024 KTM XC and XC-F range boasts totally tool-free suspension setup at both ends. Thanks to an all-new WP XACT Closed Cartridge spring fork and revised shock absorber, dialing in your cross-country machine is as easy as twisting the throttle. On the rear, a hand-adjustable dual compression control allows riders to adjust high- and low-speed settings in a matter of seconds. On the front end, the forks are also easily adjusted thanks to hand adjustable clickers on the bottom of the fork shoe and fork top cap.
AIRBOX
The airbox is designed with precisely positioned inlet ducts aimed at preventing air deformation ensuring maximum airflow and maximum filter protection. The air filter is easily accessed, without tools, by removing the left side panel. Easy maintenance is guaranteed by the Twin Air filter and filter cage design that features a simple fail proof mounting system for secure and accurate filter installation.
SERVICEABILITY
The 2024 KTM XC and XC-F range is engineered and designed to provide riders with easy-to-access service parts, as well as suspension adjustability. This allows faster track-side and off-season maintenance, as well as making Cross Country more accessible for novice riders without pit crews.
MORE USABLE POWER
The KTM 450 XC-F boasts one of the most manic 4-Stroke powerplants in the pits, with its SOHC engine proving to be the perfect example of advanced engineering. The engine is tilted 2° backward with a low sprocket position, which together with the benefits of mass centralization and reduced weight, makes the anti-squat behavior of the chassis second to none. With a massive peak power output and an overall engine weight of only 59 lb, you'll leave the competition with more than a little mud on the face.
LAUNCH CONTROL & QUICKSHIFTER
Launch control, ENGAGED! Designed for the holeshot, the 2024 KTM 450 XC-F comes standard with launch control and a Quickshifter function, allowing for fast upshifts without using the clutch. Launch control is easily engaged by pressing the traction control and Quickshifter buttons simultaneously and works by limiting the amount of power to the rear wheel, improving traction, and preventing loss of control under hard acceleration. Meanwhile, the Quickshifter function means you can bang through from 2nd to 5th gear with your focus solely on the first corner.
SELECTABLE MAPS + TRACTION CONTROL (TC)
The map select switch on the 2024 KTM 450 XC-F features a simpler design, allowing for easier functionality in switching between 2 engine maps. Map 1 provides a more linear power curve, while map 2 punches all-out with aggressive throttle and explosive power. Luckily, traction control is easy toggled to an on or off position from the same switch, ensuring maximum traction and a distinct advantage in wet or muddy conditions.
ABSOLUTE CONTROL
No matter how gnarly the trail is, you'll stay in control thanks to a rider-focussed frame design that has not only been engineered for longitudinal rigidity, but also repositions rotating mass closer to the center of gravity. Thick frame walls also improve reliability, flex characteristics and offer unmatched rider feel. The shock mounting also provides the perfect amount of anti-squat for better traction out of corners, while the footpeg mounting is positoned in such a way to reduce the risk of hooking up on roots or rocks. Additionally, forged brackets on the lower frame rails allow for easy removal and installation of the standard skid plate.
ERGONOMICS
The 2024 KTM XC and XC-F range features a specially-developed rider triangle, providing unmatched knee contact and gripping surfaces - especially when standing on the pegs. While the plastics work to expel mud buildup in wet, muddy conditions, the flat seat profile and high-grip orange seat cover providing exceptional rider movement and control. A handy grip pocket under the seat, just above the airbox, makes gripping the bike and lifting it much easier.
GO THE DISTANCE
A 2.24 gallon polythene fuel tank incorporates a threaded filler cap and an integrated fuel pump. The fuel pump features an external fuel line which is specifically positioned to make it less exposed and susceptible to damage, while ensuring a steady, uninterrupted flow of fuel.
MASS CENTRALIZATION
Ready to rip your arms out of the sockets? Together with the benefits of mass centralization and the anti-squat behavior of the chassis, the 2024 KTM 450 XC-F gets its power down perfectly when tearing out of corners.
WP XACT FORK
An all-new WP XACT Closed Cartridge fork finds its way into the KTM XC and XC-F line-up for 2024. A new mid-valve piston concept optimizes the oil flow within the cartridge, providing fast and consistent damping characteristics. This also avoids unwanted foaming of oil which can lead to the unwanted changes in damping characteristics and less consistent damping behavior. The fork is also fully adjustable in rebound and compression, thanks to hand adjustable clickers on the bottom of the fork shoe and fork top cap.
WP XACT SHOCK
Receiving an all-new design in 2023, the rear shock features less overall length and less weight compared to the previous generation but retains its 300 mm travel. A CFD-optimized main piston improves initial comfort, while finding the ideal settings is taken care of by a hand-adjustable dual compression control that allows for high- and low-speed adjustments. For 2024, updated suspension settings mean riders benefit form improved balance, comfort, and cornering agility.
ULTIMATE RIGIDITY
A hollow, die-cast aluminum swingarm is designed to offer optimal stiffness and reliability at the lowest possible weight. A 22 mm rear axle is also fitted to match the flex characteristics of the chassis. This, along with the chain guard and chain gliders result in improved durability and less chance of hooking on boots or external objects out on the trail, as well as reducing dirt build up around the swingarm and chain guard.
GROUND CLEARANCE
CFD designed footrests offer a bigger contact area for better control of the bike while standing on the pegs, but also makes them less susceptible to hooking up on deep trail ruts, logs and rocks . This was achieved by a narrow frame mounting design, which also helps reduce overall weight.
CONSISTENCY
The compact and lightweight SOHC cylinder features a short profile with the camshaft located close to the center of gravity. Lightweight valves are actuated via a DLC coated rocker arm with optimized timing, specifically designed to deliver precise levels of torque and throttle response. The diameter of the intake valves is 40 mm, while on the exhaust it is 33 mm. The intake ports also allow higher flow coefficients, resulting in a more efficient and powerful engine, with the valve cover reducing the number of mounting screws, and a single oil spray jet guarantees efficient cooling while keeping the weight low.
ENGINE
-
TRANSMISSION
5-speed
-
STARTER
Electric starter
-
STROKE
63.4 mm
-
BORE
95 mm
-
CLUTCH
Wet, DDS multi-disc clutch, Brembo hydraulics
-
DISPLACEMENT
449.9 cm3
-
EMS
Keihin EMS
-
DESIGN
1-cylinder, 4-stroke engine
CHASSIS
-
WEIGHT (WITHOUT FUEL)
105.3 kg
-
TANK CAPACITY (APPROX.)
9.0 l
-
FRONT BRAKE DISC DIAMETER
260 mm
-
REAR BRAKE DISC DIAMETER
220 mm
-
FRONT BRAKE
Disc brake
-
REAR BRAKE
Disc brake
-
CHAIN
520 X-Ring
-
FRAME DESIGN
25CrMo4 steel central-tube frame
-
FRONT SUSPENSION
WP XACT-USD, Ø 48 mm
-
GROUND CLEARANCE
359 mm
-
REAR SUSPENSION
WP XACT Monoshock with linkage
-
SEAT HEIGHT
954 mm
-
STEERING HEAD ANGLE
63.9°
-
SUSPENSION TRAVEL (FRONT)
300 mm
-
SUSPENSION TRAVEL (REAR)
300 mm
The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.